|
|
|
| Acquisition test for CEMP in Zhagegaonao Basin of Beishan area |
| XU Haihong1, LU Jincai1, LIU Jianli2, HAN Xiaofeng1, CHEN Xiaolong2, ZHANG Quan2 |
1. Xi’an Center of China Geological Survey, Xi’an 710054, China;
2. Geophysical and Geochemical Exploration Team, Shaanxi Bureau of Geology and Mineral Exploration and Development, Xi’an 710043, China |
|
|
|
|
Abstract In order to determine the field acquisition parameters of electrical collection in Beishan area, and carry out CEMP exploration effectively and reasonably, the authors took Zhagegaonao Basin as an example and set up series of experimental research work on collecting parameters according to different factors affecting field data collection. The data acquisition results for each parameter were analyzed through comparison of the apparent resistivity curves, and the appropriate electrode spacing and acquisition time were also determined. According to the comprehensive research, the electrode spacing in the study area should be 100 m, and it can be shortened appropriately in some harsh areas, with the minimal value of 70 m. The effective acquisition time in the field is 12 hours, and it should not be less than 8 hours in some special cases. The acquisition time should be extended appropriately in interference areas. The authors also summarized and analyzed the quality control countermeasures and improvement measures in different situations that affect the quality of field data collection, such as grounding resistance and wind interference. The field section interpretation shows that CEMP can reveal the main strata distribution and reflect the structural characteristics of the study area. The results of this paper can provide a basis for CEMP exploration and deployment of Mesozoic basins in Beishan area.
|
|
Received: 25 April 2019
|
|
|
|
|
|
[1] 王家映. 电磁阵列剖面法的基本原理[J].地球科学:中国地质大学学报,1990,15(增刊):1-11.
[2] 孙传文,邓前辉,刘国栋,等.电磁阵列剖面法的实施与资料处理初探[M]//刘国栋,邓前辉.电磁方法研究与勘探.北京:地震出版社,1993:52-59.
[3] 郑莉,王玉青,赵俊峰,等.CEMP勘探在鄂尔多斯西缘前陆盆地的应用效果[J].中国石油勘探,2005,10(5):41-44.
[4] 张翔,陈清礼,苏朱刘,等.同步阵列大地电磁测深法及其在山区的应用技术与效果[J].石油物探,1999,38(3):93-100.
[5] 张全胜,杨生,刘沈衡.连续电磁剖面法在石油勘探中的应用[J].资源调查与环境,2002,23(3):205-213.
[6] 刘益中,朱春生,杨生.CEMP方法在KLY地区的应用[J].地质找矿论丛,2004,19(4):257-260.
[7] 孙卫斌,张长江,员智能.连续电磁剖面法在古潜山构造勘探中的应用[J].地震地质,2001,23(2):207-211.
[8] 汪卫毛. 复杂探测地区连续电磁剖面法(CEMP)应用[J].江汉石油职工大学学报,2004,17(4):18-19.
[9] 张昆,何钰娴,严加永.大地电磁测深三维反演系统及应用[J].中国地质调查,2015,2(1):25-30.
[10] 何展翔,江纹波,罗卫峰,等.西部山区CEMP采集方法技术试验研究[J].地震地质,2001,23(2):201-206.
[11] 左国朝,何国琦.北山板块构造及成矿规律[M].北京:北京大学出版社,1990:1-209.
[12] 严加永,吕庆田,孟贵祥,等.内蒙古北山地区地球物理场特征与构造分区及深部结构研究[J].地球物理学进展,2009,24(2):439-447.
[13] 苗来成,朱明帅,张福勤.北山地区中生代岩浆活动与成矿构造背景分析[J].中国地质,2014,41(4):1190-1204.
[14] 王永江,耿树方,李长江.北山大地构造深部成因与浅部成矿特征遥感综合分析[J].中国地质,2009,36(3):714-727.
[15] 杨合群,李英,杨建国,等.北山造山带的基本成矿特征[J].西北地质,2006,39(2):78-95.
[16] 党犇,赵虹.北山盆地群砂岩储层特征及分类评价[J].西安工程学院学报,1998,20(增刊):39-43.
[17] 李明杰,郑孟林,曹春潮,等.北山—阿拉善地区侏罗—白垩纪盆地的叠合演化[J].石油与天然气地质,2004,25(1):54-57.
[18] 仁和爱,李刚.北山地区总口子盆地油气勘探方向[J].海洋地质动态,2005,21(4):24-27.
[19] 吴少波,白玉宝.北山盆地群侏罗—白垩系生储盖特征及油气远景[J].地质科学,2006,41(1):1-9.
[20] 卢进才,陈高潮,李玉宏,等.银额盆地及邻区石炭系—二叠系油气地质条件与资源前景[M].北京:地质出版社,2012.
[21] 费锡铨. 电法勘探——原理与方法[M].北京:地质出版社,1986.
[22] 国家能源局.SY/T 5820—2014石油大地电磁测深法采集技术规程[S].北京:石油工业出版社,2015.
[23] 王家映. 石油电法勘探[M].北京:石油工业出版社,1992.
[24] 于鹏,吴健生,王家林,等.GMS-06等大地电磁仪采集数据的对比分析与实测资料的处理解释[J].地震学报,2006,28(5):554-557.
[25] 郭建强,张森琦,刁玉杰,等.二氧化碳地质储存技术方法概论[M].北京:地质出版社,2014.
[26] 刘建利,申安斌,陈小龙.大地电磁测深方法在内蒙古西部银根—额济纳旗盆地石炭系—二叠系油气地质调查中的应用[J].地质通报,2011,30(6):993-1000.
[27] 《物探监督》编写组.物探监督[M].北京:石油工业出版社,2012. |
|
|
|
2019, Vol. 6 
